Att U-verse Remote Codes For Samsung Smart TV

Looking to replace your original remote for your Samsung TV? The Att U-verse remote is a great option, and you can set it up right out of the box. However, if you experience a power surge or other issues, you may need to program it yourself. First, find the correct At&T U-verse remote codes, then follow the user manual instructions. Troubleshooting process also available if needed.

Att U-verse Remote Codes For the Samsung TV List

You need the manufacturer’s code for your remote brand to pair the Att Uverse remote with your Samsung TV. We have listed down universal remote codes for all remote brands and models, and you can use the program sky remote to Samsung tv method to set up.

How to Program Att U-verse Remote For Samsung TV

You can program your U-verse remote using Auto code search, manufacturer code method, or any other program method following proper remote programming instructions or use Samsung sky remote code post steps for setting up. Here we have updated all the best applicable methods with the Att U-verse remote.

This method allows you to program using a compatible code similar to the Samsung code for the Philips universal remote method. It is the recommended and most straightforward method. Follow the instructions below to program the Att U-verse remote for Samsung TVs.

1. Turn on your Samsung TV (The device should not be in standby mode)
2. Before going to the program, note down the code and insert new batteries in the remote.
3. Now face the remote toward the Samsung TV from an appropriate distance.
4. Press and hold the “TV” button on the remote control.
5. After this, immediately press the “OK” button while holding the “TV” button.
6. Release both buttons when all the mode buttons blink twice.
7. Now that your remote is ready to program enter the four-digit code using the remote keypad.
8. The desired “device” key will blink three times if it receives the correct code.
9. If the remote gets an invalid code, the “device” key will give a long blink.

Note: you will need to do this setup quickly because if the remote setup timed out, you would need to start the procedure from step 4.

After this, press the “power” button on the remote. The Samsung TV should turn off. If the TV doesn’t respond to the remote command, you must repeat the exact programming instructions from step 4 and use another code.

Check all the functions as expected. If you notice the remote doesn’t work well, you will need to reprogram the remote using a different code.

How to Program Att U-verse Remote For Samsung TV Without Code

In this method, you will need to program the remote without code. The remote will send several codes to the device, and the device will pair with the remote when it receives the correct code. Follow the instruction below to program the Att U-verse remote for Samsung TV.

1. Switch on your Samsung TV and insert new batteries in the remote.
2. Now press and hold the “TV” button on the remote and press the “OK” button simultaneously.
3. Release both buttons when all the mode buttons blink twice.
4. Now enter the 9-2-2 using the remote keys. The “TV” button will blink twice if the entered code is correct.
5. After that, press and hold the “play” key until the device turns off and release it when it turns off.
6. Use the “REW” key to search back the codes and the “FF” key to move the codes forward.
7. Press the “enter” key to save the code when the device turns off.
8. Press the “exit” key to move the remote to normal mode. The device key will blink three times when the remote comes to normal mode.
9. If the device doesn’t get any code, the button will blink Red, and the remote will come to normal mode.
10. Turn back on the Samsung TV by pressing the “power” key on the remote. If the Samsung TV turns on, the remote is ready to use.

If the device doesn’t respond to the remote, you will need o to reprogram the remote from step 2.

Att U Verse Remote Not Working Properly

If you’re experiencing difficulties with your At&T U-Verse remote, here are some suggestions. You may either restart your receiver or purchase a new remote from the online Accessory store. Here are the instructions for restarting your receiver

1. Press and hold down the POWER button for 10 seconds. This will force your receiver to shut down.
2. Press the POWER button again to restart your receiver. Your receiver should boot up again after a few seconds.
3. Wait for 5-8 minutes for the restart process to complete. During this time, your receiver will run several diagnostic tests and check for any possible errors.
4. Note that any DVR recordings in progress will be impacted. Make sure to restart your receiver when there are no important recordings in progress.

Conclusion:

Please write us your feedback and suggestions about our universal remote articles. We regularly update our website with new & working universal remote codes For Samsung TV. Let us know if you need any new code here or would like us to add any brand/model universal codes here.